Manual Video Setting

Only use if you haven’t already selected the Automatic Hardware Acceleration.

 

Please note that when you’re recording through a web browser or Windows Media Player, you must run the web browser or Windows Media Player after the video settings have been changed.
These are the general steps for setting up: Run liteCam > Change Video settings >run movie player (web browser or any media player) > Record

 

If you run any media player before you set up the video option, the screen may not record or play properly.

 

In order to set this up, Click the Tools menu > select Video Options
You will see the Video Options dialog box shown below.

You will notice that hardware acceleration is set to Full (unless you have changed it manually.) Click the “Set Hardware Acceleration to None” button.
After recording, open this dialog box again and click the “Restore hardware Acceleration to Full” button.

 

Click the “OK” button to save and close these changes

 

 

---

 

Next: Audio Settings

 

---

 

The entire contents of this publication are copyright (C) 2008 by innoheim. As a condition of receiving this publication, you agree that you will not unlawfully duplicate, transmit electronically, download to a database, broadcast by any means whatsoever, duplicate, or disseminate any portion of this publication, or use any of the information in this publication in violation of the Copyright Act.