Computer Sound Recording: Manual Setting

 

If the Audio Setting Wizard was unable to detect your sound card, you can manually select your sound device by clicking the Change button from Audio Setting Wizard.

 

1. Click the Play button, and you will hear a sample sound.
2. Select devices one at a time from the Devices box.
3. When the proper device is selected you will see sound waves moving in the Show Wave box, this means that this is the proper device to use to record sound.
4. Adjust the Volume for the device using the volume slider and click the OK button.

 

 

If you have a webcam with an integrated microphone connected to your computer, it is possible for you to see two mixer devices in the Mixer Devices drop down menu. We recommend that you unplug your webcam for optimum recording results, since a microphone on the camera may start working simultaneously with liteRecorder. If it does, you will not be able to record sound properly.

 

 

---

 

Next: Microphone Setup

 

---

 

The entire contents of this publication are copyright (C) 2008 by innoheim. As a condition of receiving this publication, you agree that you will not unlawfully duplicate, transmit electronically, download to a database, broadcast by any means whatsoever, duplicate, or disseminate any portion of this publication, or use any of the information in this publication in violation of the Copyright Act.